|影院精品视频在线播放|天天干天天干天天干天天日天天操天天射|亚洲无码在线色视频婷婷|欧美一级2023|一级黄视频免费看|a级a级a级a片|免费91av在线

Products

PRODUCT CENTER

HongJin-M801 One-component moisture-curable silicone

M801.jpg

Brief introduction


modelHongJin-M801
Specification300ML/branch
characteristicHongJin-M801 is a one-component moisture-curable elastic structural adhesive. Its main component is a special silane-modified polymer that cures by reacting with moisture in the atmosphere. This product is colorless and highly transparent in appearance, non-flowing paste. This product has good bonding properties to a variety of materials, including glass, metal, rubber, plastic, wood and inorganic materials, etc.
Applicable ProductsVarious electrical and electronic products, especially suitable for sealing, potting, insulating and waterproofing of connectors for automobiles and mobile phones.


Technical parameter


AttributesReference
typeSilane Modified Polymer
density(m/cm31.5±0.10
hardness(Shaw BrothersA)35±10
Dry time(min)≤70
Shear strength(MPa),7sky25℃/50%RH,AL/AL≥0.8
Elongation(%), 7sky25℃/50%RH≥300
Operation time(After opening)30minute



Precautions


1、Clean and dry the surface to be adhered to.

2、Squeeze the glue onto the cleaned and clean surface to make it evenly distributed, and then close and fix the surface to be adhered.

3、The thickness of the potting should not exceed 5mm as far as possible. The deeper the adhesive layer is, the longer the curing time is.

4、The speed of curing is related to temperature and humidity. High temperature and high humidity can promote moisture curing. It takes 7 days to fully cure.

5、It is recommended to store in a dry and cool place below 30°C.

Copyright ? 2020 深圳市宏進科技有限公司All Rights Reserved  粵ICP備20066503

0755-28307837

scan it
Pay attention to the public account

Scan and pay attention to the public number